Custom Metal Hardware Manufacturer in Sialkot, Pakistan

Thirty pieces per design. That is per design rather than per colourway, so a mixed set of charms or a plate in two finishes can sit inside one order. Smaller trial quantities are sometimes possible on simple shapes, so it is worth asking before you scale a design back.

Pricing starts at $15 per piece. The final figure depends on size, metal, thickness, finish, how fine the cut detail is, the fixing, and quantity. A small brass charm sits near the bottom of that range, while a large stainless plate with plating and riveted fixings sits well above it. Send the artwork and the intended size and we will quote against it rather than guess.

A vector file (AI, EPS, SVG or PDF) is ideal because it cuts directly. A high-resolution photograph or a clean drawing is enough to begin, and we redraw it as a cutting file. We will tell you before sampling if any part of the mark is too fine to hold in metal at the size you want, which is the most common reason a first design needs adjusting.

Brass, stainless steel, zinc alloy and copper. Finishes include mirror polish, brushed or satin, antique and gunmetal oxidising, gold, rose gold, nickel and black plating, colour fill in engraved recesses, and soft or hard enamel. A sample in your chosen combination is produced before bulk, because plating colour and surface texture do not translate reliably from a screen.

Most commonly with rivets, two or four posts pushed through and set from behind, which is the strongest option and the one used on the plaques shown on this page. Prongs bend over behind the panel and are quick to set in leather. Sew-on loops let a piece be stitched where the backing must not be pierced. Charms and pendants use jump rings or lobster clasps. We recommend a fixing once we know the material it is going onto.

Yes. Shaped zip pullers, pull chains and wallet chains are built from individually cut links rather than stock findings, and they are supplied with lobster clasps, split rings or a direct swivel fitting to match the zipper you are using. Tell us the zipper size and brand and the fitting is matched to it.

About 10 days to a physical sample from approved artwork, then 3 to 4 weeks for bulk once you have approved that sample in writing, plus shipping. Allow roughly six to eight weeks from first contact to hardware in hand, and tell us early if you have a launch date so the sample round can be planned backwards from it.

Yes, and it usually should. Producing both at Wears For You means one order, one contact and one shipment, so a jacket and the plate that goes on it arrive together rather than on separate timelines from separate suppliers. It also keeps the finish consistent with any hardware already on the garment.

Yes. Pendants, charms and chain assemblies are produced the same way as apparel hardware, and several of the pieces shown on this page are pendants and necklaces rather than garment trims. We do not work in precious metals, so these are brass, steel, copper and zinc alloy with plated finishes rather than solid gold or silver.